Navigation 

Products-Other Water Treatment Products

Back
  • Flat sheet MBR Device

Flat sheet MBR Device

Specification

  Type Effective area(m2) Size
H*W*T(mm)
Pore Diameter(μm) Flux(L/pcs.day)
 
Flat sheet
RF-025 0.25 465*365*7.5  
0.11~0.12
100~230
RF-080 0.8 1000*490*7.5 320~560
RF-100 1 1160*518*7.5 400~700
RF-150 1.5 1750*490*7.5 600~1050
Note: Wastewater from different source, flux may be distinguishing greatly.
Packaging
Inner packing-- packaged in sealed plastic bags separately
Outer packing—export standard wooden cases or cartons

    MBR (Membrane Bioreactor) is a membrane separation technology combining with conventional
    activated sludge(CAS) process. The membrane module can take the place of the secondary
    sedimentation tank, a large number of microorganisms are intercepted, which can increase quantity of microflora, improve the sewage treatment capacity and efficiency, so that the effluent quality and volume load have been greatly improved, and the water can be used as reclaimed water or discharged under standards.
    MBR is the most advantaged technology of the Reclaimed Water Reuse, Energy Conservation and
    Emission Reduction, Upgrading and Scale Expansion.
    MBR core components are high performance submerged membrane components, PVDF shows excellent overall performance, strong mechanical property, thermal stability, physical and chemical resistance, easily forming membrane and becomes main MBR membrane materials.
    The pollutant in sewage water will firstly biodegradation in bioreactor, at the same time, because of the function of the pressure difference, the water and some small molecule solute which smaller than the aperture of the membrane in the mixed liquid will pass the membrane, and then become the treated water.
    Microorganisms and macro solute will be intercepted by the membrane, so it replaced the sedimentation tank by complete its water treatment and separate function.



    Advantages
    1.Good outlet water quality
    2.Easy to control technological parameter
    3.High load capacity for impact
    4.Lower sludge output quantity
    5.Little areas occupation of land
    6.One-time installation, put into operation quickly, easy to maintain, automatic operation.
    After MBR treatment there is almost no bacteria, outlet water quality is good. The outlet water
    Can be used as reclaimed water, widely used in the following areas.

    Domestic and sewage treatment industry
    Municipal sewage treatment and water reuse
    Sewage treatment and water reuse
    Hospital wastewater and water reuse
    Residential area, school, scenic-tourist areas sewage treatment, ect.

    Industrial wastewater treatment industry
    Chemical, petroleum, chemical fiber wastewater treatment
    Garbage leachate treatment
    Pesticide, pharmaceutical high concentration organic wastewater treatment
    Slaughter, livestock manure, food processing wastewater treatment
    Brewing, beer wastewater treatment
    In order to guarantee the normal, stable and long term operation of membrane unit. The raw water enters the MRB system has the below requirements:
    1.COD: BOD5 > 0.5
    2.SS <150mg/L
    3.NH3-N< 50mg/L
    4.1pH 6~9
    5.Oil content: total vegetable oil< 50mg/L, mineral oil < 3mg/L

    If the sewage water cannot meet the above water quality requirements, it may need pretreatment.

    Specification
      Type Effective area(m2) Size
    H*W*T(mm)
    Pore Diameter(μm) Flux(L/pcs.day)
     
    Flat sheet
    RF-025 0.25 465*365*7.5  
    0.11~0.12
    100~230
    RF-080 0.8 1000*490*7.5 320~560
    RF-100 1 1160*518*7.5 400~700
    RF-150 1.5 1750*490*7.5 600~1050
    Note: Wastewater from different source, flux may be distinguishing greatly.
    Packaging
    Inner packing-- packaged in sealed plastic bags separately
    Outer packing—export standard wooden cases or cartons
ROSUN DISINFECTION No.139 East Fifth Road of Auto Center, Economic and Development Zone, Chengdu, China. +86 28 65988030 intl-market@rosun.com.cn
Wechat
MicroBlog